Click image to view full size image
The hardness of boron carbide is only secondary to diamond and CBN. The density of the boron carbide products produced by us is close to its academic density 2.52g/cm3.
Its advantages are: High hardness, high wear-resistance ability, anti-corrosion, lower cost per use, reducing down time. It's the ideal material for sandblasting nozzle and mechanical seal.
| Service Life | |||
| Nozzle Material | Service life(h, by time) | ||
| Steel grit/shot | Silica sand | Brown aluminium oxide | |
| Alumina | 20-40 | 10-30 | 1-4 |
| Tungsten Carbide | 500-800 | 300-400 | 20-40 |
| Silicon Carbide | 600-1000 | 400-600 | 50-100 |
| Boron Carbide | 2000-2500 | 1000-1500 | 500-1000 |
| Specifications | ||||
|
Item | Specifications(mm) | ||
| I. D Φd | O. D ΦD | Length L | ||
| BCN-1301 | 2-14 | 16-37 | 10-110 | |
| Specifications | ||||
|
Item | Specifications(mm) | ||
| I. D Φd | O. D ΦD | Length L | ||
| BCN-1302 | 3-14 | 16-30 | 50-110 | |
| Specifications | ||||
|
Item | Specifications(mm) | ||
| I. D Φd | O. D ΦD | Length L | ||
| BCN-1303 | 6.4-11 | 30 | 10-110 | |
| Specifications | ||||
|
Item | Specifications(mm) | ||
| I. D Φd | O. D ΦD | Length L | ||
| BCN-1304 | 0.8-2 | 6-10 | 10-80 | |
| Specifications | ||||
|
Item | Specifications(mm) | ||
| I. D Φd | O. D ΦD | Length L | ||
| BCN-1305 | 6.4-11 | 19-30 | 145-210 | |